May 01, 2024

2017-2018 Catalog

2017-2018 Catalog [ARCHIVED CATALOG]

Course Codes and Descriptions

Use the course Filter box below to narrow the list to the subject are your are looking for. For additional information on course descriptions view the details by Course Description Details .

Course Filter
Filter this list of courses using course prefix, course code, keywords or any combination.
Prefix:	Code or Number:	Keyword or Phrase:
Choose Course Prefix	Choose Course Number	Choose Keyword
Find whole word or phrase only.


Interiors and Furnishings
	IF 289 - Interiors Exploration: New York City Credit Hours: 1 Contact Hours: 1 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Department Consent Required. Classes and appointments during a stay in New York City provide for acquisition of first-hand knowledge of the interior furnishings industry and an opportunity for cultural enrichment. Students attend an orientation seminar, visit furniture, textile and accessory showrooms, visit a New York design studio and a museum, and complete a comparative merchandising analysis based on detailed observations. Department Consent: Department Consent General Education Distribution Category Met: None
	IF 290 - Interiors Exploration: Chicago Credit Hours: 1 Contact Hours: 1 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Department Consent Required. Classes and appointments during a stay in Chicago provide for acquisition of first-hand knowledge of the interior furnishings industry. Students attend an orientation seminar, visit a design school, the merchandise Mart and Apparel Center, as well as other appointments as they relate to the interiors industry. A comparative merchandising analysis will be developed based on detailed observation. Department Consent: Department Consent General Education Distribution Category Met: None
Journalism
	JR Elective - (min. of 3) Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Department Consent: No Consent General Education Distribution Category Met: None
	JR 251 - Introduction to Journalism Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course is an introductory course in reporting and writing for newspapers and online publications, requiring students to write and report for The Collegiate, GRCC’s student publication. Students are expected to attend all class meetings and be willing to cover events and conduct interviews outside of class to submit for publication on The Collegiate website, thecollegiatelive.com. This work requires several hours per week outside of class. Prior successful completion of EN 101 is recommended, but not required. Department Consent: No Consent General Education Distribution Category Met: None
	JR 252 - Advanced Journalism Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: JR 251 or Instructor Consent English Prerequisites: None Math Prerequisites: None Corequisites: None Description: An advanced course in newspaper writing, based up on JR 251 ; and continued production of the college newspaper. Department Consent: No Consent General Education Distribution Category Met: None
	JR 253 - Journalism - Internship Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: JR 253 allows students who are currently working as interns at newspapers, radio or TV stations to apply for, and receive, college credit. NOTE: Instruction provided by internship supervisors, TV stations, or newspapers. Department Consent: No Consent General Education Distribution Category Met: None
	JR 254 - Mass Media Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course is designed to enhance the understanding of the role played by mass media in society. Throughout the course the history and development of both print and broadcast media, as well as computer-driven media is covered through readings, class discussion, videos, and possibly guest speakers from the media. The focus also includes an examination of the role and function of the news media, advertising and public relations, and the ethical implications of both entertainment and journalism. Department Consent: Department Consent General Education Distribution Category Met: None
	JR 255 - Newspaper Production Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: JR 255 offers college credit to photographers, artists, graphic artists, and designers for working on the student newspaper. The newspaper needs photos, art, cartoons, and graphic designs/illustrations done in the journalistic style. Students who enroll in JR 255 pick one of these areas of work (photo, art, or design) and then commit to do this work on the student newspaper, under the guidance of the newspaper faculty adviser. No previous experience necessary. Students should contact the newspaper adviser upon enrolling. Department Consent: No Consent General Education Distribution Category Met: None
	JR 256 - Broadcast Communication Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course focuses on all aspects of broadcast communication. The course emphasizes techniques for, and the impact of, communicating through electronic broadcast media, including radio announcing, television and web-based news and sports, interviewing, and voice delivery techniques. New broadcast technologies and career options will be discussed. This is primarily a lecture format course, not a studio-based class, but it will provide some hands-on experience in recording pieces in a broadcast style. Department Consent: No Consent General Education Distribution Category Met: None
	JR 257 - Reporting Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: A course in researching, reporting, and writing news stories for newspapers. Includes beat reporting techniques, backgrounding individuals, using public records and documents in reporting, interviewing, using computers and databases in reporting, and legal and ethical problems and responsibilities. Successful completion of EN 102 recommended before taking JR 257. Department Consent: No Consent General Education Distribution Category Met: None
	JR 266 - Fundamentals of Public Relations Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Fundamentals of Public Relations offers an examination of the role of public relations in society, business, and government. The course provides a historical perspective on the development of the PR practice, examines career options in the field, and explores the planning and implementation of public relations campaigns through readings, lectures, group discussions, case studies, hands-on exercises, and presentations. The class serves as an introductory class for those interested in pursuing PR as a course of study or career, but also serves as general elective credit for any student wishing to better understand the impact of PR in society. Recommended Skills: Competence in reading college-level material and the ability to write and speak at an appropriate level for college-level assignments. Department Consent: No Consent General Education Distribution Category Met: None
Magnetic Resonance Imaging (MRI)
	MRI Elective - (min. of 3) Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Department Consent: No Consent General Education Distribution Category Met: None
	MRI 200 - Professional Prospectus Credit Hours: 1 Contact Hours: 1 Prerequisites/Other Requirements: BI 121 and BI 122 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course serves to orient the magnetic resonance imaging (MRI) student to the profession of medical imaging. Students will explore the integration of MRI within the encompassing healthcare system with emphasis on the inter-relating roles of the various health care professionals. The evolution of MRI as a professional will be investigated with students classifying various organizations and agencies that drive the development and continuing education of MRI technologist’s role and responsibility. Discussion will surround such topics as educational requirements, program accreditation, professional credentialing, and continuing education. The course concludes with exploration and discussion surrounding potential legal and ethical implications associated with providing healthcare services. Effective and appropriate communication methods and processes as a means to provide exceptional patient care and reduce risk are emphasized. With the MRI - focused content, and updated professional requirements offered, technologists registered in other imaging modalities should find value in this course. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 201 - Computer Applications in Medical Imaging Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 222 and MRI 230 and MRI 261 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Computer applications in the radiologic sciences related to image capture, display, storage and distribution. Specific to MR, the content imparts an understanding of the components, principles and operation of digital imaging systems, image data management and data manipulation (postprocessing). Additional content provides basic concepts of patient information management including medical records concerns and privacy and regulatory issues. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 220 - MR Physics I Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 200 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The first of a two-semester course will cover the basic principles of MRI, data acquisitions and tissue characteristics (proton spin, relaxation times, phasing and de-phasing) in image formation. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 222 - MR Physics II Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 220 and MRI 241 and MRI 260 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course will expose the student to more advanced techniques in Magnetic Resonance Imaging. Gradient Echo, Cardiac Imaging, Magnetic Resonance Angiography, Diffusion, Perfusion and Spectroscopy will be introduced. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 230 - MR Procedures and Pathophysiology I Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 220 and MRI 241 and MRI 260 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Provide an overview of imaging techniques related to the CNS (brain and spine), and MSK (musculoskeletal). Specific clinical applications, coils that are available and their use, considerations in the scan sequences, specific choices in the protocols, and positioning criteria are practiced. Anatomical structures and the plane that best demonstrates anatomy will be discussed as well as signal characteristics of normal and abnormal structures. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 232 - MR Procedures and Pathophysiology II Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 222 and MRI 230 and MRI 261 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Provide an overview of imaging techniques related to the BODY (abdomen/pelvis), special imaging techniques (functional MRI, spectroscopy, DWI, heart), and breast. Special clinical applications, coils that are available and their use, considerations in the scan sequences, specific choices in the protocols, and positioning criteria are practiced. Anatomical structures and the plan that best demonstrates anatomy will be discussed as well as signal characteristics of normal and abnormal structures. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 240 - MRI Image Analysis Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 201 and MRI 232 and MRI 262 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Case study analysis and student image portfolios will be utilized to evaluate for optimal diagnostic value. Critical assessment will include principles of quality image formation, identification of anatomy, identification of pathology, and parameter adjustments needed for differential diagnosis. Additional discussion will focus quality control procedures, PACS image display, image post processing, and image archiving. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 241 - Sectional Anatomy Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 200 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Provide an overview of transverse, coronal, and sagittal sectional anatomy of the human body. Special emphasis is placed on a study of the head and brain, thorax, abdomen and pelvis. The shoulder, elbow, hip and knee are also examined. Correlations between cadaver cross-sections, CTs, MRIs and radiographs are explored. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 260 - Pre-clinical Preparation Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 200 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course prepares the MRI student for safe participation in clinical education within the MRI environment. Students will explore and discuss the importance of MRI safety and patient assessment. The ability to critically think will be emphasized as students investigate various patient-related considerations requiring adaptation to successfully execute the MRI procedure. Basic pharmacology as it relates to the MRI patient will be explored and discussed, as will infection control practices and procedures. Students will be introduced to MRI equipment, quality control, and MRI procedures. While most of the course is delivered online, students will practice and master various safety procedures in a face-to-face workshop setting. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 261 - Clinical Practice 1 Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 260 (C or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This is the first in a series of three progressive clinical courses providing the students an opportunity to observe, practice and master procedures in the magnetic resonance imaging (MRI) department of affiliating hospitals, clinics, or other MRI provider facilities. Students remain under the direct supervision of a technologist and/or physician while in the clinical education setting. Students will acquire knowledge and learn skills related to MRI safety, equipment, patient care, and basic imaging procedures and protocols, with emphasis on fostering the professional values, attitudes, and behaviors necessary to be successful in the healthcare environment. Students are expected to achieve a minimum of 6 competencies as listed by The American Registry of Radiologic (ARRT) following the Primary Pathway requirements. An online component will accompany the hands-on clinical practice aspect of the course to further advance learning within a learning community. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 262 - MRI Clinical Practice II Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 261 (C or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This is the second in a series of three progressive clinical courses allowing the student an opportunity to observe, practice, and master procedures in the magnetic resonance imaging (MRI) department of affiliating hospitals, clinics, or other MRI provider facilities. Students remain under the direct supervision of a technologist and/or physician while in the clinical education setting. Students will advance the skills and knowledge they gathered in MRI 261 - Clinical Practice 1 while engaging in more complex procedures and protocols. Emphasis will be placed on patient safety and comfort while fostering growth in the professional values, attitudes, and behaviors necessary in the healthcare environment. Students completing this course are expected to achieve a minimum of 12 competencies as listed by the American Registry of Radiological Technologists (ARRT) following the Primary Pathway requirements. An online component will accompany the hands-on clinical practices aspect of the course to further advance learning within a learning community. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 263 - MRI Clinical Practice III Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 261 (C or Higher) and MRI 262 (C or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This is the final of three clinical courses allowing the student an opportunity to observe, practice, and master procedures in the magnetic resonance imaging (MRI) department of affiliating hospitals, clinics, or other MRI provider facilities while under the direct supervision of a technologist and/or physician. This course focuses on the completion of all remaining competencies required by the American Registry of Radiologic Technologists (ARRT) following the Primary Pathway requirements. Upon completion of all required competencies, efforts will be made to enrich the student¿s clinical education experience by arranging for participation in non-routine advanced procedures and protocols or in MRI clinically relevant special projects. These clinical assignments will be determined and arranged by the Educational Coordinator in collaboration with the Clinical Education Provider based on availability and clinical relevance. Emphasis will be placed on patient safety and comfort. Mastery of the professional values, attitudes, and behaviors necessary in the healthcare environment are expected. An online component will accompany the hands-on clinical practices aspect of the course to further advance learning within a learning community. Department Consent: No Consent General Education Distribution Category Met: None
	MRI 295 - MRI Certification Exam Preparation Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MRI 201 and MRI 232 and MRI 262 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course provides the student with instructional review and a self examination process as preparation for the certification exam in Magnetic Resonance Imaging. Department Consent: No Consent General Education Distribution Category Met: None
Liberal Arts & Sciences
	Nat. Sci. & Math Elective - (min. of 3) Prerequisites/Other Requirements: None English Prerequisites: Math Prerequisites: None Corequisites: None Description: Department Consent: None General Education Distribution Category Met: None
	Nat. Sci. & Math Elective - (min. of 4) Prerequisites/Other Requirements: None English Prerequisites: Math Prerequisites: None Corequisites: None Description: Department Consent: None General Education Distribution Category Met: None
Manufacturing
	MN Elective - (min. of 3) Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Department Consent: No Consent General Education Distribution Category Met: None
	MN 100 - Manufacturing Principles Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The course is a study of manufacturing principles, which include, but are not limited to team development and problem solving. The ability to work in teams including interpersonal and organizational skills is stressed. The student will learn and complete project management. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 102 - Lean Manufacturing Principles Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The course focuses on the study and practice of core competencies which create a culture for corporations to eliminate waste activities. This course will include the concepts of Lean Manufacturing practices: Value Stream Mapping, Waste Identification, Kaizan, SMED, Kan Ban, Problem Solving, 5S, Standardized Work, and Poke Yoke. The participant will be involved in practical application, project presentation and project management. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 108 - Technical Skills Enhancement Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course emphasizes the contextualization of skills specific to fields of study in manufacturing and trades. This is accomplished through use of examples and exercises explaining the uses of math, basic blue print reading, mechanical concepts, spatial skill development and reading comprehension. Areas of study incorporate fractions, decimals, ratios, proportions, direct and inverse variation, linear equations, basic geometry formulas, mechanical comprehension and calculations for simple machines, reading and interpreting technical industrial drawings, and reading technical passages for comprehension. This class offers instruction for the many aspects of education required for manufacturing, design and industrial fields. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 113 - Mechanical Power Transmission Credit Hours: 2 Contact Hours: 2.25 Prerequisites/Other Requirements: TE 103 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: A course in power transmission equipment which supplies the essential links between machines and their source for driving power. This course discusses bearings, chain drives, belts, conveyors, couplers, controls, gears, speed reducers, and lubrication. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 114 - Machine Trades Blueprint Reading Credit Hours: 2 Contact Hours: 2.25 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: An introductory course covering the lines, views, dimensions and notes used on blueprints in the machine trades. Free-hand sketching is also incorporated. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 114 course. MN 114A (Machine Trades Blueprint Reading Module A) - Students learn to identify the types of lines and views used in engineering drawings and recognize and interpret the attributes of an assembly and detail engineering drawing. MN 114B (Machine Trades Blueprint Reading Module B) - Students interpret engineering working drawing measurements and dimensioning as well as interpret engineering drawing notes. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 116 - Basic Welding Credit Hours: 2 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The purpose of this course is to acquaint the student with the fundamentals of oxyacetylene, electric arc, and inert gas welding. Students learn basic skills in gas and arc welding, the standards for safe welding practices and the ability to determine sound welding design. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN116 course. MN 116A (Basic Welding Module A) - To acquaint the student with the fundamentals of oxyacetylene, welding, cutting and brazing. Provide the student with basic skills in gas welding, the standards for safe welding practices and the ability to determine sound welding design. MN 116B (Basic Welding Module B) - To acquaint the student with the fundamentals electric arc, and inert gas welding. Provide the student with basic skills in arc welding, the standards for safe welding practices and the ability to determine sound welding design. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 119 - Introductory Machine Operations Credit Hours: 4 Contact Hours: 8 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This class covers the basic operation of metal-removing machinery most commonly used in industry. Areas of instruction include the proper use of power saws, drill presses, lathes, vertical mills, and surface grinders. Shop safety, basic metrology, and an introduction to CNC machining is also included. Recommended Skills: Math proficiency of MA 095 or Higher, and a basic understanding of blueprint reading/interpretation prior to enrolling in this course. This course is offered in both lecture/lab and module formats. Students must successfully complete all four (4) modules, in sequence, to achieve full course credit. MN 119A (Introductory Machine Operations Module A) – An introduction to the manufacturing environment. Special emphasis is placed on general safety procedures and recognition of hazardous materials. Proper use of hand tools, measuring tools, and layout tools is emphasized. MN 119B (Introductory Machine Operations Module B) – Students study and apply the fundamentals of metal cutting with the proper application of cutting tools. Specific training in the proper use of power saws, drill presses, and vertical mills is addressed. MN 119C (Introductory Machine Operations Module C) – Students study and apply the fundamentals of metal cutting with the proper application of cutting tools. Specific training in the proper use of an engine lathe with traditional and special tooling, setups, and fixturing methods are introduced. The importance of tighter tolerances and better surface finishes is also stressed. MN 119D (Introductory Machine Operations Module D) – Students will study basic surface grinding and CNC operations. Students will use a Haas CNC mill in both manual and G-code modes to introduce the basic concepts of CNC setup and operation. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 134 - Basic Oxyacetylene Welding Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The purpose of this course is to acquaint the student with the fundamentals of oxyacetylene welding cutting and brazing, and to provide students with basic skills in oxy-fuel operations and the standards for safe welding practices. This course along with MN 136 , MN 202 , MN 203 and MN 231 prepares students to take tests and complete laboratory work leading to the American Welding Society Sense Level 1 Credential. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 134 course. MN 134A (Basic Oxyacetylene Welding Module A) - A study of oxyacetylene welding equipment and materials. Emphasizes skills needed to adjust equipment and perform safely while gas welding a variety of metals in various positions. All welds will be based on American Welding Society standards for quality. MN 134B (Basic Oxyacetylene Welding Module B) - A study of oxyacetylene welding equipment and materials. Emphasizes skills needed to adjust equipment and perform safely while gas cutting, brazing, and braze welding. All welds will be based on American Welding Society standards for quality. Department Consent: No Consent General Education Distribution Category Met: None
	MN 136 - Basic Arc Welding Credit Hours: 4 Contact Hours: 8 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course covers the theory and application of Shielded Metal Arc Welding on plate steel and multiple joint configurations. Emphasis is placed on the methods of performing various types of welds on all position work to the American Welding Society code. This course along with MN 134 , MN 202 , MN 203 and MN 231 prepares students to take tests and complete laboratory work leading to the American Welding Society Sense Level 1 Credential. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 136 course. MN 136A (Basic Arc Welding Module A) - Study of the theory of Shielded Metal Arc Welding (SMAW). Power supplies and electrodes are emphasized. Proper procedures for performing various welds in all positions will be emphasized. All welds will be based on American Welding Society standards for quality. MN 136B (Basic Arc Welding Module B) - A study of the theory of arc welding. Electrodes and welding metallurgy will be emphasized. Proper procedures for performing various welds in all positions will be emphasized. All welds will be based on American Welding Society standards for quality. Department Consent: No Consent General Education Distribution Category Met: None
	MN 146 - Introduction to Robotics Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: In this course, students will learn the use of industrial robotic technology. The students will learn the basic characteristics, unit configuration, system controls, and user justification. Robotic operations and programming fundamentals will be applied by the student in a lab setting. Department Consent: No Consent General Education Distribution Category Met: None
	MN 160 - National Electric Code Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: TE 103 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: A study of the application and interpretation of the National Electric Code rules. This course covers the current edition of the NEC in preparation to sit for the State of Michigan Journeyman’s or Master’s electrical licensing exam. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 165 - Plastics Testing Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course covers the identification and testing of plastic materials used in industry. It emphasizes procedures that familiarize students with mechanical, thermal, electrical, chemical, optical, and weathering properties of plastics. Testing follows ASTM guidelines. Four hours lecture/laboratory combination. Recommended Skills: MN 220 is recommended but not required as a prerequisite Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 199 - Theory of Machine Operations Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This class covers the theory of metal-removing machinery most commonly used in industry. Areas of instruction include the proper use of power saws, drill presses, lathes, vertical mills, and surface grinders. Shop safety, basic metrology, and an introduction to Computer Numerical Controlled (CNC) machining are also included. It is recommended that students have math proficiency equivalent to MA 095 or Higher, and a basic understanding of blueprint reading/interpretation prior to enrolling in this course. This course is offered in both lecture/lab and module formats. Students must successfully complete both modules, in sequence, to achieve full course credit. MN 199A (Theory of Machine Shop Module A) – An introduction to a manufacturing environment with special emphasis placed on general safety procedures and the recognition of hazardous materials. The proper use of hand tools, measuring tools, and layout tools is emphasized while students study the general capabilities of power saws, drill presses, and vertical mills. MN 199B (Theory of Machine Shop Module B) – Students continue the study and application of metal cutting fundamentals with training in the proper use, tooling, and setup of an engine lathe. Students will also study and apply the fundamentals of precision grinding and Computer Numerical Controlled (CNC) machining methods. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 200 - Intermediate Machine Operations Credit Hours: 4 Contact Hours: 8 Prerequisites/Other Requirements: MN 119 (C- or Higher) or MN 199 (C- or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This class covers the intermediate operation of metal-removing machinery most commonly used in industry. Areas of instruction include the intermediary use of power saws, drill presses, lathes, vertical mills, surface grinders, and Computer Numerical Controlled (CNC) vertical mills. This course is offered in both lecture/lab and module formats. Students must successfully complete all four (4) modules, in sequence, to achieve full course credit. MN 200A (Intermediate Machine Operations Module A) – Students will study and apply the fundamentals necessary for the intermediary use of power saws, drill presses, and vertical mills. MN 200B (Intermediate Machine Operations Module B) – Students will study and apply the fundamentals necessary for the intermediary use of an engine lathe. MN 200C (Intermediate Machine Operations Module C) – Students will study and apply the fundamentals necessary for the intermediary use of a surface grinder. MN 200D (Intermediate Machine Operations Module D) – Students will study and apply the fundamentals necessary for the intermediary use of a Computer Numerical Controlled (CNC) vertical mill. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 202 - MIG / Gas Metal Arc Welding Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course emphasizes proper usage and assembly of the equipment used in MIG (GMAW) and Flux Cored Arc Welding (FCAW). The course content includes the theory behind the process, safe operation, proper welding procedures and techniques used in welding steel. Student performances are held to the American Welding Society standards of performance in the welding of coupons and testing. This course along with MN 134 , MN 136 , MN 203 and MN 231 prepares students to take tests and complete laboratory work leading to the American Welding Society Sense Level 1 Credential. This course is also delivered in Modules. You must complete each of the modules listed below in order to receive credit for the course. MN 202A MIG (GMAW) Emphasizes proper assembly of the equipment used in GMAW welding and includes safe operation, proper welding procedures and techniques used in welding steel. MN 202B MIG (FCAW) Emphasizes proper assembly of the equipment used in FCAW welding and includes safe operation, proper welding procedures and techniques used in welding steel and aluminum. Department Consent: No Consent General Education Distribution Category Met: None
	MN 203 - TIG / Gas Tungsten Arc Welding Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course emphasizes proper usage and assembly of the equipment used in the TIG (GTAW) welding process. The course content includes the theory behind the process, safe operation, proper welding procedures and techniques used in welding steel, aluminum, and stainless steel. Student performances are held to the American Welding Society standards of performance in the welding of coupons and testing. This course along with MN 134 , MN 136 , MN 202 and MN 231 prepares students to take tests and complete laboratory work leading to the American Welding Society Sense Level 1 Credential. This course is also delivered in Modules. You must complete each of the modules listed below in order to receive credit for the course. MN 203A TIG (GTAW) TIG STEEL. Emphasizes proper assembly of the equipment used in TIG welding and includes safe operation, proper welding procedures and techniques used in welding steel. MN 203B TIG (GTAW) TIG Aluminum and Stainless Steel. Emphasizes proper assembly of the equipment used in TIG welding and includes safe operation, proper welding procedures and techniques used in welding steel, aluminum, and Stainless steel. Department Consent: No Consent General Education Distribution Category Met: None
	MN 213 - Machinery’s Handbook Credit Hours: 2 Contact Hours: 2.25 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: MN 213 trains the industrial worker to use the Machinery’s Handbook to solve shop problems through the use of algebraic formulas, geometric constructions, and data tables. Topics include shop math, material properties, machining parameters, tapers, threads, gearing, and tooling specifications. Recommended Skills: Mathematical concepts including basic algebra and trigonometry. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 213 course. MN 213A (Machinery’s Handbook Module A) - MN 213A trains the industrial worker to use the Machinery’s Handbook to solve shop problems through the use of algebraic formulas, geometric constructions, and data tables. Topics include shop math, material properties, and machining parameters. Recommended Skills: Basic algebra and trigonometry MN 213B (Machinery’s Handbook Module B) - MN 213B trains the industrial worker to use the Machinery’s Handbook to solve shop problems through the use of algebraic formulas, geometric constructions, and data tables. Topics include threads, gearing, and tooling specifications. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 214 - Advanced Machine Trades Blueprint Reading Credit Hours: 2 Contact Hours: 2.25 Prerequisites/Other Requirements: MN 114 (C or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: An advanced course in the study and interpolation of complicated machine and tool prints of the machine trades. Because, this is an advanced course, students should have previous blue print reading or drafting skills. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 214 course. MN 214A (Advanced Blueprint Reading Module A) - An advanced course in the study and interpolation of complicated machine and tool prints of the machine trades. This is an advanced course, students should have previous blueprint reading or drafting skills. MN 214B (Advanced Blueprint Reading Module B) - Module B is a continuation of MN 214A. An advanced course in the study and interpolation of complicated machine and tool prints of the machine trades. This is an advanced course, students should have previous blueprint reading or drafting skills. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 215 - Industrial Physics Credit Hours: 2 Contact Hours: 2.25 Prerequisites/Other Requirements: TE 103 and TE 104 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: A course in elementary physics that will cover mechanics, scientific notations, metric systems, simple machines, strength of materials, law of gases and hydraulics. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 217 - Hydraulics Credit Hours: 4 Contact Hours: 6 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course covers the fundamentals of moving fluid and hydraulic power, design of hydraulic pumps, operation of hydraulic valves, selection of cylinders, motors, accumulators, reservoirs, filters and the design of hydraulic circuits. Recommended Skills: Should have basic math and writing skills. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 217 course. MN 217A (Hydraulics Module A) - Introduction to the fundamentals of hydraulics. Students will study the principles of pressure, force, and flow as they apply to basic hydraulic systems. MN 217B (Hydraulics Module B) - Introduction to the different types of hydraulic pumps and actuators. The student will study how the various types of hydraulic pumps and actuators differ in design and operation. Also, the student will learn what hydraulic contamination control is and why it is important to the maximum operational longevity of hydraulic equipment. In addition, the student will study hydraulic reservoirs. MN 217C (Hydraulics Module C) - Introduction to different categories and types of hydraulic valves. The student will study directional control valves, pressure control valves, and flow control valves. Also, the student will study hydraulic fluid conductors, seals, accumulators, and intensifiers. Department Consent: No Consent General Education Distribution Category Met: None
	MN 218 - Pneumatics Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course covers the fundamentals of moving fluids and pneumatic power. Students review design requirements of pneumatic compressors, circuits and robotic applications, and gain an understanding of the laws which apply to gases independent of heat, pressure and volume. Additionally, operating pneumatic valves and selecting proper pneumatic cylinders and motors, as well as pneumatic air preparation and distribution within normal operation of industrial applications is taught. The course is offered in both a lecture / lab format as well as a 3 module format. For credit with module course the student must succesfully pass all three modules to gain full credit for the course. Also a student must succesfully complete each module before they may take the following module. MN 218A (Pneumatics Module A) - Places emphasize on the basics of equipment, safety and basic operating principles of fluid power considering gas. MN 218B (Pneumatics Module B) - Builds both partical and theory by developing an understanding of the laws governing gases, allowing students to have applications providing evidence of how and why these laws effect fluids and equipment. MN 218C (Pneumatics Module C) - Completes the students understanding of circuits, design and troubleshooting for pneumatic systems. Including compressors, DCV, Regulators and Actuators. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 219 - Survey of Polymer Technology Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students learn the basic chemistry of the most common polymers used in the industry today. How thermoplastic and thermosetting polymers are formed is a key consideration. Also emphasized throughout this course are the physical and chemical behaviors of plastics as they relate to their applications. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 220 - Basic Plastics Processing Credit Hours: 4 Contact Hours: 6 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The course assumes the student has little or no prior knowledge of the manufacturing activities of making plastic products. The class provides the student with an awareness level of making polymer based products in a manufacturing setting. We will look at various molding process including Injection Molding, Blowmolding, Extrusion Forming, Thermoforming, various other processes and the nomenclature associated with them. Students will be in a lab setting each week by doing a variety of different types of experiments. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 223 - Injection Molding Theory Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MN 220 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The theoretical and practical concepts relating to the production of plastic articles by injection molding; emphasis is on machine and peripheral equipment operation as they affect plastic part quality; includes properties of plastics, and molding faults with special emphasis on troubleshooting techniques. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 230 - Fundamentals of TIG and MIG Welding Credit Hours: 4 Contact Hours: 8 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Emphasizes proper assembly of the equipment used in GMAW and GTAW welding and includes safe operation, proper welding procedures and techniques used in welding steel, aluminum, and stainless steel. This is an advanced course as all students performances will be held to the American Welding Society standards of performance in the welding of coupons and testing. MN 230A (Tig Welding Steel Module A) - Proper assembly of the equipment used in Gas Tungsten Arc Welding. Includes safe operation, proper welding procedures and techniques used in welding carbon steel and stainless steel. All student performances will be held to the American Welding Society standards of performance in the welding of coupons and testing MN 230B (Tig Welding Aluminum Module B) - Emphasizes proper assembly of the equipment used in GMAW and GTAW welding and includes safe operation, proper welding procedures and techniques used in welding steel, aluminum, and stainless steel. Student performances will be held to the American Welding Society standards of performance in the welding of coupons and testing. MN 230C (Mig Welding Module C) - Emphasizes proper assembly of the equipment used in GMAW welding and includes safe operation, proper welding procedures and techniques used in welding steel. Student performances will be held to the American Welding Society standards of performance in the welding of coupons and testing. MN 230D (Flux Cored Arc Welding Module D) - Emphasizes proper assembly of the equipment used in GMAW and FCAW welding and includes safe operation, proper welding procedures and techniques used in welding steel and aluminum. Student performances will be held to the American Welding Society standards of performance in the welding of coupons and testing. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 231 - Welding Fabrication, Design, and Testing Credit Hours: 4 Contact Hours: 8 Prerequisites/Other Requirements: MN 136 (D- or Higher) and MN 202 (D- or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: MN 203 Description: This course is a study of the elements of metal fabrication and the methods for destructive and nondestructive testing. The procedures for shop fabrication and field erection are also covered. This course along with MN 134 , MN 136 , MN 202 , and MN 203 prepares students to take tests and complete laboratory work leading to the American Welding Society Sense Level 1 Credential. Department Consent: No Consent General Education Distribution Category Met: None
	MN 232 - Technical Pipe Welding Credit Hours: 5 Contact Hours: 8 Prerequisites/Other Requirements: MN 231 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: To acquaint the student with the fundamentals of pipe welding in different positions, including 5G and 6G positions using the 6010 and 7018 electrode. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 233 - Welding Automation Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: MN 202 (C- or Higher) and [DR 150 (C- or Higher) or DR 258 (C- or Higher) or EG 110 (C- or Higher)] English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The introduction to welding automation exposes students to core concepts and theory behind automation practices as they are used in the industry. Students learn basic robotic programming on Fanuc welding robots and other automation equipment. Special emphasis is placed on welding joint design, setup, and the effects of welding parameters and their outcomes on welded members. It is recommended that students have basic math skills and college level reading and writing skills prior to enrolling in this course. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 234 - Metallurgy Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course focuses on the application of metallurgical fundamentals of common metal. The behavior of metals under a variety of conditions, machining, welding, forming and heat treating is covered. The behavior of metals under production and service conditions, including fatigue, corrosion, warpage and their prevention is also emphasized. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 235 - Basic Computer Numerical Controlled (CNC) Programming Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: MN 119 (D- or Higher) or MN 199 (D- or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course provides opportunities for students to learn the fundamental concepts necessary for the successful programming and operation of a Computer Numerical Controlled (CNC) machine tool utilizing the Fanuc-style (M&G code) programming language. This course is also offered in a module format. Students must successfully complete all three (3) modules, in sequence, to achieve full course credit. MN 235A (CNC Machine Programming Module A) - A study of CNC milling involving coordinate systems, tooling, work setup, programming and program editing. MN 235B (CNC Machine Programming Module B) - A study of CNC turning involving coordinate systems, tooling, work setup, programming and program editing. MN 235C (CNC Machine Programming Module C) - An introduction to CNC applications using Haas CNC machine tools. The basic concepts of CNC setup and operation with both manual and Fanuc controls are covered. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 236 - Computer-Aided Manufacturing (CAM) Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: MN 235 (D- or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course offers opportunities to learn the programming and operation of a computer numerical controlled (CNC) machine tool by utilizing the computer-aided manufacturing (CAM) software package - Mastercam. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 238 - Advanced Computer Numerical Controlled (CNC) Programming Credit Hours: 3 Contact Hours: 4 Prerequisites/Other Requirements: MN 235 (D- or Higher) English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course provides opportunities for students to learn advanced computer numerical controlled (CNC) applications for complex programming and operation of a CNC machine tool utilizing the Fanuc-style (M&G code) programming language. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 242 - Applied Injection Molding Credit Hours: 4 Contact Hours: 6 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course will provide the student with knowledge and experience in solving common issues encountered running injection molding production equipment. The student will relate machine control parameters to their effect on processes and part quality. The student will set-up processes using different molds in injection molding machines, students duplicate industrial standards to obtain the highest quality parts with the shortest possible cycle times. Added emphasis will be placed on troubleshooting and process optimization. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 244 - Advanced Plastics Process Credit Hours: 4 Contact Hours: 6 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: In this course, students gain in depth knowledge about the processes of Extrusion, Blowmolding and Thermoforming. They learn through a series of classroom lectures, hands on lab experiments and actual company tours. Students set-up and operate Thermoforming, Extrusion and Blowmolding machines, gaining practical experience similar to that encountered in industry. Department Consent: No Consent General Education Distribution Category Met: None
	MN 248 - Quality Assurance Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: The role of the modern quality assurance department, and the tools and skills required in quality assurance today; how standards are set, how to take samples and calculate statistical information, sample statistics, measurements, and procurement procedures included. Three hours lecture. Student will need a scientific calculator; no prior knowledge of statistics is required. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 249 - Statistical Process Control Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: This course covers simple statistical procedures for the control of manufacturing processes, including the study of data analysis and process improvement methodologies, product flow charts, cause-and-effect diagrams, Pareto charts, pie charts, histograms, and a variety of variable and attribute charts. Students learn to interpret SPC data, conduct process capability studies, and Repeatability and Reproducibility studies. Student will need a scientific calculator. No prior knowledge of statistics is required. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 251 - Gauges for Measurements Credit Hours: 1 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students learn to use the common measuring tools encountered in quality science operations. These include calipers, micrometers, and height and depth gauges. Also, an introduction to the use of a coordinate measuring machine. Correct measuring techniques as well as tool care and maintenance are emphasized for each measuring tool. Two hours lecture/lab combination. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 252 - Geometric Tolerancing Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 98 or Higher (C or Higher) OR ALEKS Score of 30 or Higher OR Accuplacer Algebra Score of 76 or Higher OR SAT Math Score of 24.5 or Higher OR ACT Math Score of 18 or Higher Corequisites: None Description: Students learn the system of geometric dimensioning and how conventional and geometric tolerancing work together to assure uniformity of fit, function, and producibility of manufactured parts. Students learn to confirm tolerances and solve problems in quality assurance. Two hours lecture. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 253 - Applied Quality Techniques 1 Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students apply their knowledge of managerial process control to solve actual industrial problems and learn to troubleshoot a manufacturing process using management theory. Students also learn techniques and theories of continuous quality improvement. Review of materials in preparation for the ASQC (Quality Technician Certification Examination) is also part of the course. Student will need a scientific calculator; no prior knowledge of statistics is required. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 254 - Experimental Design Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MN 248 and MN 249 and MN 253 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students learn the statistical concepts of experimental design, starting with the classical approach and working up to the latest experimental design techniques of Taguchi and Shaninin. How to apply specific experimental designs to specific applications, and how to modify experimental design models. Three hours lecture. Student will need a scientific calculator; no prior knowledge of statistics is required. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 255 - Applied Quality Techniques 2 Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: MN 253 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students continue learning to apply statistics to problems of quality control. Topics include advanced statistical applications, manufacturing, hypothesis testing, inspection theory, regression, probability and measurement/sampling theory. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
	MN 256 - Introduction to Coordinate Measuring Machines Credit Hours: 2 Contact Hours: 2 Prerequisites/Other Requirements: MN 251 and TE 103 English Prerequisites: None Math Prerequisites: None Corequisites: None Description: Students learn the basics of coordinate measuring machine (CMM) operation, coordinate systems, stylus calibration feature measurement, programming and report generation. The maintenance and basic types of coordinate measuring machines are discussed. This course is also delivered in Modules. You must complete each of the modules listed below, in order to receive full credit for the MN 256 course. MN 256A (Introduction to Coordinate Measuring Machines Module A) - Students learn the basics of coordinate measuring machine (CMM) operation, coordinate systems, stylus calibration, feature measurement. The maintenance and basic types of coordinate measuring machines are discussed. MN 256B (Introduction to Coordinate Measuring Machines Module B) - Students learn the basics of coordinate measuring machine (CMM) operation, coordinate systems, stylus calibration, feature measurement, programming and report generation. The maintenance and basic types of coordinate measuring machines are discussed. Course Fee: $15.00 Department Consent: No Consent General Education Distribution Category Met: None
Mathematics
	MA Elective - (min. of 3) Credit Hours: 3 English Prerequisites: Description: MA 108 Trigonometry Credits: 3 MA 110 College Algebra Credits: 4 MA 124 Mathematics for Liberal Arts Students Credits: 4 MA 127 Finite Mathematics with Applications Credits: 4 MA 129 Survey of Calculus Credits: 5 MA 131 Precalculus Credits: 5 MA 133 Calculus with Analytic Geometry 1 Credits: 5 MA 215 Statistics Credits: 4 Math (Does not meet MTA Requirement) MA 107 Intermediate Algebra Credits: 4
	MA Elective - (min. of 4) Credit Hours: 4 English Prerequisites: Description: MA 110 College Algebra Credits: 4 MA 124 Mathematics for Liberal Arts Students Credits: 4 MA 127 Finite Mathematics with Applications Credits: 4 MA 129 Survey of Calculus Credits: 5 MA 131 Precalculus Credits: 5 MA 133 Calculus with Analytic Geometry 1 Credits: 5 MA 215 Statistics Credits: 4 Math (Does not meet MTA Requirement) MA 107 - Intermediate Algebra Credits: 4
	MA Elective - (min. of 4) Must meet MTA requirements English Prerequisites: Description: MA 108 Trigonometry Credits: 3 MA 110 College Algebra Credits: 4 MA 124 Mathematics for Liberal Arts Students Credits: 4 MA 127 Finite Mathematics with Applications Credits: 4 MA 129 Survey of Calculus Credits: 5 MA 131 Precalculus Credits: 5 MA 133 Calculus with Analytic Geometry 1 Credits: 5 MA 215 Statistics Credits: 4
	MA 97 - Pre-Algebra Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: ALEKS score of 4 or Higher Corequisites: None Description: MA 97 is a one semester review of Pre-Algebra concepts. Topics include signed numbers, solving linear equations, ratios and proportions, percents, applications of introductory geometry, measurement, statistics and graphs, an introduction to exponents and polynomial expressions. Work is done both with and without a calculator. Recommended Skills: Reading level of 94 or Higher on LOEP or successful completion of ES 123 with C- or Higher. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 98 - Elementary Algebra Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 97 (C or Higher) or ALEKS score of 14 or Higher Corequisites: None Description: MA 98 is designed for students needing to learn beginning algebra or as a review for students who have not recently taken an algebra course. Topics in this course include problem solving techniques, introductory data analysis, interpretation of graphs, operations with real numbers, square roots, equations, formulas, ratio and proportion, linear inequalities in one variable, solving linear equations, graphing linear equations in two variables, slope of a line, equation of a line, systems of linear equations, linear modeling, integer exponents, scientific notation, operations on polynomials, factoring, and solving quadratic equations. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 99 - Mathematical Literacy Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 97 (C or Higher) or ALEKS score of 14 or Higher Corequisites: None Description: MA 99, Mathematics Literacy, is designed to prepare non-math and non-science majors for MA 124 (Mathematics for Liberal Arts Students). Topics include strategies for problem solving, numeracy, mathematical thinking and investigations, proportional reasoning, introduction to linear functions, basic statistical concepts, introduction to exponential growth and decay, and basic geometry and measurement concepts. Students develop conceptual and procedural tools that support the use of the key mathematical concepts in a variety of contexts. *This course is not intended to prepare students for MA 107 Intermediate Algebra.* Course Fee: $10.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 105 - Basic Geometry Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 98 (C or Higher) or ALEKS score of 30 or Higher Corequisites: None Description: MA 105 is a study of Euclidean Geometry which incorporates principles of mathematical reasoning. Topics include investigations of properties and relationships of two and three dimensional figures such as angles, triangles, circles, polygons, convex sets, areas, volumes and similar figures. The concepts of undefined terms, definitions, postulates, theorems and corollaries are explored relative to their role in building a mathematical system. This course provides a good foundation for students intending to take Trigonometry. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 107 - Intermediate Algebra Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 98 (C or Higher) or ALEKS score of 30 or Higher Corequisites: None Description: MA 107 is designed to increase students’ understanding of algebra. Topics include linear functions and inequalities, variation, polynomials, rational expressions and equations, rational exponents and roots, radical equations, quadratic functions, exponential functions and an introduction to logarithms. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 108 - Trigonometry Credit Hours: 3 Contact Hours: 3 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 107 (C or Higher) or ALEKS score of 46 or Higher Corequisites: None Description: MA 108 is designed to prepare students for higher level mathematics courses, especially for those who plan to take Calculus. Topics include angular measure, development of trigonometric functions, trigonometric identities, reductions, radian measure, variation and graphs of trigonometric functions, functions of composite angles, identities including composite angles, right triangles and applications, oblique triangles and applications, trigonometric equations and inverse trigonometric functions. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 110 - College Algebra Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 107 (C or Higher) or ALEKS score of 46 or Higher Corequisites: None Description: MA 110 is designed primarily for students whose program does not require any mathematics above the level of College Algebra. Topics include graphing data and data analysis; solving equations and inequalities; functions, combinations of functions, polynomial, rational, power, exponential and logarithmic functions; systems of equations, matrices, sequences and series. Some probability and counting may be included. Use of graphing calculators and current technology will be emphasized. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 124 - Mathematics for Liberal Arts Students Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 98 (C or Higher) or MA 99 (C or Higher) or MA 107 (C or Higher) or ALEKS score of 30 or Higher Corequisites: None Description: MA 124 is intended for students majoring in liberal arts or other fields that do not have a specific mathematics requirement. Its purpose is to give students a broad exposure to a variety of real-world applications of mathematics. Topics include voting methods, apportionment, mathematics of finance, number theory, shapes and patterns in geometry, networks and directed graphs, counting methods, probability and statistics. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 127 - Finite Mathematics with Applications Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 107 OR MA 108 OR MA 110 OR MA 131 OR MA 133 OR MA 134 OR MA 245 OR MA 255 OR MA 257 or ALEKS placement score of 46 or Higher Corequisites: None Description: MA 127 is designed to give business, economics, management, life sciences and social sciences students a background in finite mathematics. Topics include linear functions, mathematical models, systems of linear equations and inequalities, matrices, linear programming using both the graphical and the simplex methods, mathematics of finance, sets, counting principles and concepts of probability and statistics. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 129 - Survey of Calculus Credit Hours: 5 Contact Hours: 5 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 110 OR MA 127 OR MA 131 or ALEKS placement score of 61 or Higher Corequisites: None Description: MA 129 is intended for students majoring in business, economics, life sciences and social sciences. Topics in this course include limits of functions, differentiation and integration of polynomial, exponential, and logarithmic functions, curve sketching, optimization, related rates, selected techniques of integration and an introduction to multivariable calculus. Applications of integration include area, growth, decay and differential equations. A graphing calculator is required for this course. MA 129 is not intended for those curricula requiring MA 133 , MA 134 , MA 255 or MA 257 . Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 131 - Precalculus Credit Hours: 5 Contact Hours: 5 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 107 ORA MA 108 OR MA 110 or ALEKS placement score of 61 or Higher Corequisites: None Description: MA 131 is designed for students who intend to enroll in the Calculus sequence (MA 133 , MA 134 , MA 255 ). Expressions and functions investigated in this course are polynomial, rational, radical, trigonometric, exponential and logarithmic. Applications will be introduced throughout the course. Graphing calculators will be utilized to enhance understanding and gain insight through explorations. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 133 - Calculus with Analytic Geometry 1 Credit Hours: 5 Contact Hours: 5 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: [MA 108 and MA 110 ] OR MA 131 or ALEKS placement score of 76 or Higher Corequisites: None Description: MA 133 is the first course in the three-semester Calculus sequence. Topics include limits, continuity, and differentiation, with applications to indeterminate forms, curve sketching, optimization and related rates involving algebraic, trigonometric, logarithmic and exponential functions. Antidifferentiation and definite integrals will be introduced. A graphing calculator is required. This course is required for students majoring in mathematics, engineering, physics, computer science, architecture or actuarial sciences. Students should be very proficient in algebra and trigonometry learned in precalculus prior to enrolling in this course. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 134 - Calculus with Analytic Geometry 2 Credit Hours: 5 Contact Hours: 5 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 133 (C or Higher) Corequisites: None Description: MA 134 is the second course in the three-semester Calculus sequence, emphasizing integration and series. Topics include techniques of integration, applications of the definite integral, parametric equations, polar coordinates, improper integrals, infinite series and its applications. Students should be very proficient in algebra, trigonometry, and differentiation using the standard rules from Calculus 1 prior to enrolling in this course. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 138 - Introduction to Computer Algebra Systems Credit Hours: 1 Contact Hours: 1 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: None Corequisites: MA 133 Description: MA 138 is a hands-on introduction to the computer algebra system MAPLE. By completing a sequence of instructional modules, students will learn how to use commands such as plot, solve, evaluate and substitute, and will also learn how to use loops, the on-line menu and text writing. The course will utilize Windows and will incorporate Windows’ features such as Paint. MA 138 is useful for students who plan on a career in mathematics, science or engineering. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement. Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 210 - Mathematics for Elementary Teachers 1 Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 107 OR MA 108 OR MA 110 OR MA 127 OR MA 129 OR MA 131 OR MA 133 OR MA 134 OR MA 245 OR MA 255 OR MA 257 or ALEKS placement score of 46 or Higher Corequisites: None Description: MA 210 is designed to provide preservice teachers with a conceptual framework for elementary mathematics. This is accomplished through the use of appropriate manipulatives in a laboratory setting. Topics include problem solving, fundamental concepts and structures of number systems, study of sets, systems of whole numbers, integers, rational numbers, decimals, number theory and real number systems. This course is designed for those students intending to obtain elementary teaching certification. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 211 - Mathematics for Elementary Teachers 2 Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 107 OR MA 108 OR MA 110 OR MA 127 OR MA 129 OR MA 131 OR MA 133 OR MA 134 OR MA 245 OR MA 255 OR MA 257 or ALEKS placement score of 46 or Higher Corequisites: None Description: MA 211 is designed to provide preservice teachers with the fundamental concepts of probability, counting, statistics, geometry and systems of measurement. Emphasis is on developing understanding through exploring and modeling using appropriate manipulatives and technology, as well as the historical evolution of concepts. Hands on laboratory activities are incorporated. This course is designed for those students intending to obtain elementary teaching certification. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 215 - Statistics Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses: MA 107 OR MA 108 OR MA 110 OR MA 127 OR MA 129 OR MA 131 OR MA 133 OR MA 134 OR MA 245 OR MA 255 OR MA 255 or ALEKS placement score of 46 or Higher Corequisites: None Description: MA 215 is designed for students needing an introductory (not calculus-based) Statistics course. Topics include descriptive statistics, probability distributions, estimation, sampling distributions, hypothesis testing, regression and correlation, chi-square tests and analysis of variance. In addition, students will solve applied problems by completing required computer assignments using statistical computing software and graphing calculators. Applications apply to all fields including education, social sciences, business, engineering, medicine and the sciences. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: Mathematics
	MA 245 - Discrete Mathematical Structures Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: C or Higher in one of the following courses MA 131 or MA 133 or MA 134 or MA 255 or MA 257 or ALEKS placement score of 76 or Higher Corequisites: None Description: MA 245 is a survey of Discrete Mathematics. Topics include mathematical logic, sets, relations, functions, combinatorial mathematics, recurrence relations, proof techniques, mathematical induction, graphs, digraphs, trees and algorithms. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 255 - Calculus with Analytic Geometry 3 Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 134 (C or Higher) Corequisites: None Description: MA 255 is the third course in the three-semester Calculus sequence, and will introduce students to two main areas of study: multivariable Calculus and vector Calculus. Topics included in the first area are partial derivatives, multiple integrals, directional derivatives and gradients, maximums and minimums, cylindrical and spherical coordinates, lines, planes, and quadric surfaces. Topics included in the second area are dot and cross products, vector-valued functions, vector fields, line and surface integrals, curl and divergence, Green’s Theorem, Stokes’ Theorem and the Divergence Theorem. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 257 - Differential Equations and Linear Algebra Credit Hours: 4 Contact Hours: 4 Prerequisites/Other Requirements: None English Prerequisites: None Math Prerequisites: MA 255 (C or Higher) Corequisites: None Description: MA 257 is an introduction to Differential Equations and Linear Algebra. Differential equations topics include linear, separable, homogeneous and exact equations; systems of differential equations; solutions by series, numerical methods and Laplace transforms. Linear algebra topics include systems of linear equations, matrices, determinants, vector spaces and linear transformations. Applications are incorporated when appropriate. Please check the Michigan Transfer Agreement (MTA) list to see if this course fulfills the Mathematics and Natural Science requirement). Course Fee: $19.00 Department Consent: No Consent General Education Distribution Category Met: None
	MA 107 or Higher Elective - (min. of 3) English Prerequisites: Description:
	MA 107 or Higher Elective - (min. of 4) English Prerequisites: Description:
	Mathematics General Education - Elec Credit Hours: min. of 4 English Prerequisites: Description:
	Mathematics General Education - Elec (Must meet MTA requirements) Credit Hours: min. of 4 English Prerequisites: Description:
	Mathematics General Education - Elect Credit Hours: min. of 3 English Prerequisites: Description:
	Mathematics General Education - Elect (Must meet MTA requirements) Credit Hours: min. of 3 English Prerequisites: Description:
	Mathematics General Education - Elective Credit Hours: varies by course English Prerequisites: Description: MA 107 - Intermediate Algebra Credit Hours: 4 MA 108 - Trigonometry Credit Hours: 3 MA 110 - College Algebra Credit Hours: 4 MA 124 - Mathematics for Liberal Arts Students Credit Hours: 4 MA 127 - Finite Mathematics with Applications Credit Hours: 4 MA 129 - Survey of Calculus Credit Hours: 5 MA 131 - Precalculus Credit Hours: 5 MA 133 - Calculus with Analytic Geometry 1 Credit Hours: 5 MA 215 - Statistics Credit Hours: 4

Page: 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11

Contract All Courses | Print this page.

Print this Page

Course Codes and Descriptions

IF 289 - Interiors Exploration: New York City

IF 290 - Interiors Exploration: Chicago

JR Elective - (min. of 3)

JR 251 - Introduction to Journalism

JR 252 - Advanced Journalism

JR 253 - Journalism - Internship

JR 254 - Mass Media

JR 255 - Newspaper Production

JR 256 - Broadcast Communication

JR 257 - Reporting

JR 266 - Fundamentals of Public Relations

MRI Elective - (min. of 3)

MRI 200 - Professional Prospectus

MRI 201 - Computer Applications in Medical Imaging

MRI 220 - MR Physics I

MRI 222 - MR Physics II

MRI 230 - MR Procedures and Pathophysiology I

MRI 232 - MR Procedures and Pathophysiology II

MRI 240 - MRI Image Analysis

MRI 241 - Sectional Anatomy

MRI 260 - Pre-clinical Preparation

MRI 261 - Clinical Practice 1

MRI 262 - MRI Clinical Practice II

MRI 263 - MRI Clinical Practice III

MRI 295 - MRI Certification Exam Preparation

Nat. Sci. & Math Elective - (min. of 3)

Nat. Sci. & Math Elective - (min. of 4)

MN Elective - (min. of 3)

MN 100 - Manufacturing Principles

MN 102 - Lean Manufacturing Principles

MN 108 - Technical Skills Enhancement

MN 113 - Mechanical Power Transmission

MN 114 - Machine Trades Blueprint Reading

MN 116 - Basic Welding

MN 119 - Introductory Machine Operations

MN 134 - Basic Oxyacetylene Welding

MN 136 - Basic Arc Welding

MN 146 - Introduction to Robotics

MN 160 - National Electric Code

MN 165 - Plastics Testing

MN 199 - Theory of Machine Operations

MN 200 - Intermediate Machine Operations

MN 202 - MIG / Gas Metal Arc Welding

MN 203 - TIG / Gas Tungsten Arc Welding

MN 213 - Machinery’s Handbook

MN 214 - Advanced Machine Trades Blueprint Reading

MN 215 - Industrial Physics

MN 217 - Hydraulics

MN 218 - Pneumatics

MN 219 - Survey of Polymer Technology

MN 220 - Basic Plastics Processing

MN 223 - Injection Molding Theory

MN 230 - Fundamentals of TIG and MIG Welding

MN 231 - Welding Fabrication, Design, and Testing

MN 232 - Technical Pipe Welding

MN 233 - Welding Automation

MN 234 - Metallurgy

MN 235 - Basic Computer Numerical Controlled (CNC) Programming

MN 236 - Computer-Aided Manufacturing (CAM)

MN 238 - Advanced Computer Numerical Controlled (CNC) Programming

MN 242 - Applied Injection Molding

MN 244 - Advanced Plastics Process

MN 248 - Quality Assurance

MN 249 - Statistical Process Control

MN 251 - Gauges for Measurements

MN 252 - Geometric Tolerancing

MN 253 - Applied Quality Techniques 1

MN 254 - Experimental Design

MN 255 - Applied Quality Techniques 2

MN 256 - Introduction to Coordinate Measuring Machines

MA Elective - (min. of 3)

Math (Does not meet MTA Requirement)

MA Elective - (min. of 4)

Math (Does not meet MTA Requirement)

MA Elective - (min. of 4) Must meet MTA requirements

MA 97 - Pre-Algebra

MA 98 - Elementary Algebra

MA 99 - Mathematical Literacy

MA 105 - Basic Geometry